ARA JAGUAR 5000

Configuration via Web-based manager

1. In your browser log into Jaguar's Web Administration

2. Go to the Configuration page

3. From the menu on the left, click on Others under the Protocol group

4. From the top menu, select ICAP

5. Make sure that Send Client Address checkbox is checked

6. Apply changes

7. Click on the ICAP Profile button on the bottom of the page

8. Add a new profile

9. Type in "icap://<IP>:<PORT>/OMSScanReq-AV" to Vectoring Point 1

10. Type in "icap://<IP>:<PORT>/OMSScanResp-AV " to Vectoring Point 3

11. Apply changes

Scanning HTTPS Content

1. Go to the Configuration page

2. From the menu on the left, select SSL under the Protocol group

3. Check the Enable SSL checkbox

4. Check the Support SSL intercepting checkbox

5. Upload root certificate

6. Upload root key

7. Apply changes and restart the device