Protocols and Activities

The following table shows the protocols and activities supported by MetaDefender Industrial Firewall & IPS.

BACnet

Read Only

bvlc_result
read broadcast distribution table
read broadcast distribution table ack
read_foreign_device_table
read foreign device table ack
For forwarded npdu, distribute broadcast to network, and original unicast npdu and original broadcast npdu (for original broadcast npdu, the following is if a network SDU is NOT conveyed):
- acknowledgeAlarm
- confirmedCOVNotification
- confirmedEventNotification
- getAlarmSummary
- getEnrollmentSummary
- atomicReadFile
- readProperty
- readPropertyConditional
- readPropertyMultiple
- requestKey
- readRange
- lifeSafetyOperation
- subscribeCOVProperty
- getEventInformation
- i-Am
- i-Have
- unconfirmedCOVNotification
- unconfirmedEventNotification
- timeSynchronization
- who-Has
- who-Is
- utcTimeSynchronization
original broadcast npdu if a network SDU is conveyed:
- Who-Is-Router-To-Network
- Available for vendor proprietary messages
- Reserved for use by ASHRAE
- Network-Number-Is
- What-Is-Network-Number
- Set-Master-Key
- Request-Master-Key
- Update-Distribution-Key
- Update-Key-Set
- Request-Key-Update
- Security-Response
- Security-Payload
- Challenge-Request
- Disconnect-Connection-To-Network
- Establish-Connection-To-Network
- Initialize-Routing-Table-Ack
- Initialize-Routing-Table
- Router-Available-To-Network
- Router-Busy-To-Network
- Reject-Message-To-Network
- I-Could-Be-Router-To-Network
- I-Am-Router-To-Network

Read/Write

All Read Only operations
For forwarded npdu, distribute broadcast to network, original unicast npdu, and original broadcast npdu:
- atomicReadFile
- writeGroup
- subscribeCOVProperty
- writePropertyMultiple
- writeProperty
- deleteObject
- createObject
- removeListElement
- addListElement

Full Access

Unrestricted access

BN3500

Read Only

Serial:
- Read:
  - Rack Config
  - Slot Config
  - Group
  - Date & Time
  - Channel Setpoints
  - Rack Status
  - Rack Static Data
  - Channel Static Data
  - Alarm Event Recorder
  - System Event Recorder
  - Low Level Slot Config
  - Internal Calibration Parameter
  - Passwords
  - Request Rack Id
  - Reset Cfg/Sp Changed
  - Request/Release/Override Config Token
  - Write Date & Time
- Download DSP Code
- Config Announce
- Config Announce 91
TDI:
- Read:
  - TDI Configuration
  - Fixed FW Configuration
  - HW/FW Image
  - Low Level Configuration
  - Management DSP Code:
  - Speed DSP Code
  - Speed Test Code
  - Management Test Code
  - Management Code 0/1/2/3
  - Password
  - Status Data
  - Debug List
  - Historical Static/Waveform Data
  - High-Resolution Waveform Data
  - Current Waveform Data
  - All Current Static Data
  - Current Static Data
- Write:
  - Fixed FW Configuration
  - Time
- Acknowledge
Test:
- Read Data Request

Read/Write

All Read Only operations
Serial:
- Write Slot Config
- Write Group
- Write Time
- Trip Multiply Group Enable/Disable
- Rack Alarm Inhibit Enable/Disable
- Set Software Switch
- Write Channel Setpoints
- Group Reset
- Change Password (Config/Comm)
- Clear Alarm/System Event Flag
- Test Input Enable/Disable
- Write Low Level Slot Config
- Calibrate Channel
- Device Reboot
- IP Config
- Auto Disconnect
TDI Write:
- TDI Configuration
- Low Level Configuration
- Speed Test Code
- Management Test Code
- Management Code 0/1/2/3
- Speed Code
- Password
- Set Transient Mode
- Development/Debug:
- Forced Transient Collection
- Initiate Event
- Clear Data
- Enable/Disable Collection Group
Test:
- Write Data Request
- Execute Subroutine Request
- Enter Test Mode Request

Full Access

Unrestricted access

DCERPC_PN_IO

Read Only

Read
Read Implicit

Read/Write

All Read Only operations
Connect
Release
Read
Write
Control
Read Implicit

Full Access

Unrestricted access

DNP3

Read Only

Confirmation
Read
Select
Open file
Close file
Get file information
Response
Unsolicited response

Read/Write

All Read Only operations
Write
Enable spontaneous messages
Disable spontaneous messages
Delete file

Full Access

Unrestricted access

DICOM

Read Only

STORE_RQ:
- Not SCU to SCP transferring
N-ACTION-RQ:
- Basic Film Session SOP Class:
  - Print Basic Film Session
- Basic Film Box SOP Class:
  - Print Basic Film Box
C-GET-RQ
C-GET-RP
C-FIND-RQ
C-FIND-RP
C-ECHO-RQ
N-EVENT-REPORT-RQ
C-ECHO-RP
N-EVENT-REPORT-RP
N-GET-RQ
N-GET-RS
N-ACTION-RP
C-MOVE-RP
N-SET-RP
N-CREATE-RP
N_DELETE_RP
C-STORE_RP
SOP Class:
- Basic Film Session SOP Class
- Basic Film Box SOP Class

Read/Write

All Read Only operations
C-MOVE-RQ
N-SET-RQ
N-CREATE-RQ
N-DELETE-RQ
STORE_RQ:
- SCU to SCP transferring
N-ACTION-RQ:
- Procedural Event Logging SOP Class:
  - Record Procedural Event
- Substance Administration Logging SOP Class:
  - Record Substance Administration Event
- Media Creation Management SOP Class:
  - Initiate Media Creation
- Unified Procedure Step - Pull SOP Class:
  - Change UPS State
N-ACTION-RQ:
- Media Creation Management SOP Class:
  - Cancel Media Creation
- Unified Procedure Step - Push SOP Class:
  - Request UPS Cancel
SOP Class:
- Procedural Event Logging SOP Class
  - Substance Administration Logging SOP Class
  - Media Creation Management SOP Class
  - Unified Procedure Step - Pull SOP Class
  - Unified Procedure Step - Push SOP Class

Full Access

Unrestricted access

EGD

Read Only

Capabilities Request
Capabilities Response
NAK
Read Request
Read Response
Retrieve Configuration Request
Retrieve Configuration Response
Statistics Request
Statistics Response
Summary Request
Summary Response

Read/Write

All Read Only operations
Masked Write Request
Masked Write Response
Producer Consumer Exchange
Write Request
Write Response

Full Access

Unrestricted access

EtherCAT

Read

No Operation
Auto Increment Read
Configured Address Read
Broadcast Read
Logical Memory Read

Read/Write

All Read Only operations
Auto Increment Write
Auto Increment Read Write
Configured Address Write
Configured Address Read Write
Broadcast Write
Broadcast Read Write
Logical Memory Write
Logical Memory Read Write
Auto Increment Read Multiple Write
Configured Read Multiple Write

Full Access

Unrestricted access

Ethernet IP

Read Only

Get Attribute All
Set Attribute All
Get Attribute List
Reset
Start
Stop
Multiple Service Packet
Apply Attributes
Get Attribute Single
Find Next Object Instance
Error Response
Restore
Save
Get Member
Set Member
Insert Member
Remove Member
Group Sync
Unconnected Send
Forward Open
Get Connection Data
Search Connection Data
Ex Forward Open
Get Connection Owner
Large Forward Open
Reserved (CIP service code in {0, 11, 15, 18, 19}).
Reserved for additional Common Services (CIP service code in the range [29, 49]).

Read Only PCCC

Protected Type File Read
Protected Typed Logical Read with Two Address Fields
Word Range Read
Protected Typed Logical Read with Three Address Fields
Read Bytes Physical
Read Diagnostic Counters
Read Link Parameters
Read Section Size
Typed Read
Unprotected Read
Upload All Request
Upload Completed
Upload
Close File
Diagnostic Status
Echo
Enter Upload Mode
Exit Download/Upload Mode
File Read
Open File
Physical Read

Read/Write

All Read Only operations
Write Tag Fragmented Service
Write Tag Service
Write Object/Dint Service (Edit Timer Is Here Too)
Write Bit Service

Read/Write PCCC

Unprotected Bit Write
Read-Modify-Write
Protected Typed Logical Write with Mask
Bit Write Protected Typed Logical Write with Two Address Fields
File Write, Set Timeout
Set Data Table Size
Set Variables
Read-Modify-Write N
Word Range Write
Protected Typed File Write
Write Bytes Physical
Protected Typed Logical Write with Three Address Fields
Set NAKs
Physical Write
Unprotected Write
Typed Write
Protected Write
Protected Bit Write
Set ENQs
Set Link Parameters
Write Range Read

Full Access

All Read/Write Commands
Set Attribute Single
Set Attribute List
Create
Delete
Edit Controller Properties
PCCC Execution
SFC Forcing Enable 00
I/O Forcing Enable 00
SFC Forcing Disable 00
I/O Forcing Disable 00

FINS

Read Only

Broadcast test result
Clock
Controller data mode
Controller data status
Cycle time
Data link status
Data link table
Errors log
FAL/FALS messages
File parameters and content of files stored in the device
Memory areas
Network status
Parameter area
Program area

Read/Write

All Read Only operations
Clock
Controller data status
Controller data mode
Cycle time
Data link status
Data link table
Errors log
FAL/FALS messages
File parameters and content of files stored in the device
File transfer and reading broadcast test result
Memory areas
Network status
Parameter area
Program area

Full Access

Unrestricted access

MMS

Read Only

Status
Get Name List
Identify
Read
Get Variable Access Attributes
Get Scattered Access Attributes
Get Named Variable List Attributes
Get Named Type Attributes
Input
Report Semaphore Status
Report Pool Semaphore Status
Report Semaphore Entry Status
Initiate Upload Sequence
Upload Segment
Terminate Upload Sequence
Request Domain Upload
Get Domain Attributes
Get Program Invocation Attributes
Get Event Condition Attributes
Report Event Condition Status
Get Event Action Attributes
Report Event Action Status
Report Event Enrollment Status
Get Event Enrollment Attributes
Acknowledge Event Notification
Get Alarm Summary
Get Alarm Enrollment Summary
Read Journal
Report Journal Status
Get Capability List
File Open
File Read
File Close
File Directory
Select (Additional Service)
Alter Program Invocation Attributes (Additional Service)
Unit Control Load Segment (Additional Service)
Unit Control Upload (Additional Service)
Get Unit Control Attributes (Additional Service)
Get Event Condition List Attributes (Additional Service)
Report Event Condition List Status (Additional Service)
Get Data Exchange Attributes
Get Access Control List Attributes
Report Access Controlled Objects

Read/Write

All read-only operations
Rename
Write
Define Named Variable
Define Scattered Access
Delete Variable Access
Define Named Variable List
Delete Named Variable List
Define Named Type
Delete Named Type
Output
Define Semaphore
Delete Semaphore
Initiate Download Sequence
Download Segment
Terminate Download Sequence
Request Domain Download
Load Domain Content
Store Domain Content
Delete Domain
Create Program Invocation
Delete Program Invocation
Obtain File
Define Event Condition
Delete Event Condition
Alert Event Condition Monitoring
Define Event Action
Delete Event Action
Define Event Enrollment
Delete Event Enrollment
Alter Event Enrollment
Write Journal
Initialize Journal
Delete Journal
Create Journal
File Rename
File Delete
Define Access Control List
Delete Access Control List
Change Access Control List
Initiate Unit Control Load (Additional Service)
Create Unit Control (Additional Service)
Remove From Unit Control (Additional Service)
Add To Unit Control (Additional Service)
Load Unit Control From File (Additional Service)
Store Unit Control To File (Additional Service)
Delete Unit Control (Additional Service)
Define Event Condition List (Additional Service)
Delete Event Condition List (Additional Service)
Add Event Condition List Reference (Additional Service)
Remove Event Condition List Reference (Additional Service)
Alter Event Condition List Monitoring (Additional Service)

Full Access

Unrestricted access

MQTT

Read Only

PUBLISH0 = 0x30
PUBLISH 1 = 0x31
PUBLISH2 = 0x32
PUBLISH 3 = 0x33
PUBLISH4 = 0x34
PUBLISH 5 = 0x35
PUBLISH6 = 0x36
PUBLISH 7 = 0x37
PUBLISH8 = 0x38
PUBLISH 9 = 0x39
PUBLISHA = 0x3A
PUBLISH B = 0x3B
PUBLISHC = 0x3C
PUBLISH D = 0x3D
PUBLISHE = 0x3E
PUBLISH F = 0x3F
PUBACK = 0x40
PUBREC = 0x50
PUBREL = 0x62
PUBCOMP = 0x70
PINGREQ = 0xC0
PINGRESP = 0xD0

Read/Write

All read-only operations
CONNECT = 0x10
CONNACK = 0x20
SUBSCRIBE = 0x82
SUBACK = 0x90
UNSUBSCRIBE = 0xA2
UNSUBACK = 0xB0
DISCONNECT = 0xE0
AUTH = 0xF0

Full Access

All Read/Write operations
unknow1 = 0xc
unknow2 = 0xd2

OPC Classic

OPC-A&E

IOPCEventServer
IOPCEventServer2
IOPCEventAreaBrowser
IOPCEventSubscriptionMgt
IOPCEventSubscriptionMgt2
IOPCEventSink

OPC-DA

IOPCCommon
IOPCServer
IOPCBrowser
IOPCItemIO
IOPCItemMgt
IOPCGroupStateMgt
IOPCGroupStateMgt2
IOPCSyncIO
IOPCSyncIO2
IOPCAsyncIO2
IOPCAsyncIO3
IOPCItemDeadbandMgt
IOPCItemSamplingMgt
IOPCServerPublicGroups
IOPCBrowseServerAddressSpace
IOPCPublicGroupStateMgt
IOPCAsyncIO
IEnumOPCItemAttributes
IOPCDataCallback
IOPCItemProperties

OPC-HDA

IOPCHDA_Server
IOPCHDA_Browser
IOPCHDA_SyncRead
IOPCHDA_SyncUpdate
IOPCHDA_SyncAnnotations
IOPCHDA_AsyncRead
IOPCHDA_AsyncUpdate
IOPCHDA_AsyncAnnotations
IOPCHDA_Playback
IOPCHDA_DataCallback

OPC UA

Read Only

OPEN
MESSAGE
- FindServersRequest
- FindServersResponse
- FindServersOnNetworkRequest
- FindServersOnNetworkResponse
- GetEndpointsRequest
- GetEndpointsResponse
- ReadRequest
- ReadResponse
- HistoryReadRequest
- HistoryReadResponse
CLOSE
HELLO
ACKNOWLEDGE
ERROR

Read/Write

All read-only operations
MESSAGE
- ServiceFault
- RegisterServerRequest
- RegisterServerResponse
- RegisterServer2Request
- RegisterServer2Response
- OpenSecureChannelRequest
- OpenSecureChannelResponse
- CloseSecureChannelRequest
- CloseSecureChannelResponse
- CreateSessionRequest
- CreateSessionResponse
- ActivateSessionRequest
- ActivateSessionResponse
- CloseSessionRequest
- CloseSessionResponse
- CancelRequest
- CancelResponse
- AddNodesRequest
- AddNodesResponse
- AddReferencesRequest
- AddReferencesResponse
- DeleteNodesRequest
- DeleteNodesResponse
- DeleteReferencesRequest
- DeleteReferencesResponse
- BrowseRequest
- BrowseResponse
- BrowseNextRequest
- BrowseNextResponse
- TranslateBrowsePathsToNodeIdsRequest
- TranslateBrowsePathsToNodeIdsResponse
- RegisterNodesRequest
- RegisterNodesResponse
- UnregisterNodesRequest
- UnregisterNodesResponse
- QueryFirstRequest
- QueryFirstResponse
- QueryNextRequest
- QueryNextResponse
- ReadRequest
- ReadResponse
- HistoryReadRequest
- HistoryReadResponse
- WriteRequest
- WriteResponse
- HistoryUpdateRequest
- HistoryUpdateResponse
- CallRequest
- CallResponse
- CreateMonitoredItemsRequest
- CreateMonitoredItemsResponse
- ModifyMonitoredItemsRequest
- ModifyMonitoredItemsResponse
- SetMonitoringModeRequest
- MonitoringModeResponse
- SetTriggeringRequest
- SetTriggeringResponse
- DeleteMonitoredItemsRequest
- DeleteMonitoredItemsResponse
- CreateSubscriptionRequest
- CreateSubscriptionResponse
- ModifySubscriptionRequest
- ModifySubscriptionResponse
- SetPublishingModeRequest
- OPC_UA_SetPublishingModeResponse
- PublishRequest
- PublishResponse
- RepublishRequest
- RepublishResponse
- TransferSubscriptionsRequest
- TransferSubscriptionsResponse
- DeleteSubscriptionsRequest
- DeleteSubscriptionsResponse
- TestStackRequest
- TestStackResponse
- TestStackExRequest
- TestStackExResponse

Full Access

Unrestricted access

GE-ADL

Read Only

Read Discrete Time
Read Discrete
Read Block
Ack
Read Symbol Addr
Read Mem Sizes
Read Fault History
Ping
Read Message Queue
Read Card ID
NAK

Read/Write

All read-only operations
Write Discrete
Write Block

Full Access

Unrestricted access

GE-SDI V6

Read Only

Request Is OK
Cannot Fork Child
Cannot Read Request
Cannot Write Reply
Invalid Request
Message Too Big
QNX Send Failed
Data Upload Failed
SMem Failed
Timed Out
Unknown Problem
No Proxy
No DLPA Net
No DLPA F0
Runtime Message
Bad ADII
Bad QNX QUE
No ISync Resp
Bad Open Cmd
File Open Failed
File Size Failed
Bye
Sys (Get ID CMD)
Sys (Get Var CMD)
Sys (Get Var Info CMD)
Sys (Get Idle CMD)
Sys (Get Obj CMD)
Sys (Sim Input CMD)
Sys (Sim Output CMD)
Sys (Get Forced PTS CMD)
Sys (Get Forced Vars CMD)
Sys (Get CBUF List CMD)
Sys (Get CBUF Status CMD)
Sys (Get CBUF Cfg CMD)
Sys (Get Rev CMD)
Sys (Get TMR CMD)
Sys (Get Totalizer CMD)
Sys (Get PCode Rev CMD)
Sys (Get MAC Addr CMD)
Sys (Get CBUF File CMD)
Sys (Get Signal Data CMD)
Splain
OC2K
Ack
Slow CMD
Progress Info
Ignoring RQST
Drive Open
Drive Send
Drive Resp
Disk Size
File Size
Read File
Dam NOOP CMD
Dam Halving Speed
Dam Pre-options CMD
Dam Var List Data
Dam Var List DOnly
Dam Var List SOnly

Read/Write

All Read Only operations
Sys (Put Var CMD)
Sys (Force Var CMD)
Sys (RMForce Var CMD)
Sys (RMForce All Var CMD)
Sys (Force Input CMD)
Sys (Force Output CMD)
Sys (RMSim PT CMD)
Sys (RMForce PT CMD)
Sys (RMForce All PTS CMD)
Sys (Put Obj CMD)
Sys (Upload CBUF CMD)
Sys (Set Time CMD)
Sys (Del Get Obj Context CMD)
Sys (Put EGD CMD)
Sys (Set Totalizer CMD)
Sys (Put EGD RMW CMD)
Sys (Cleanup DDR Context CMD)
Sys (Sav Sim CMD)
Sys (Restore Sim CMD)
WFile
RMFiles
Set Time
Del File
Dam Delete CMD
Dam Var List Add
Dam Var List Delete

Full Access

Unrestricted access

GE-SDI V6E

Read Only

Connect
Get ID
Get Var
Get Idle
Get Forced Vars
Get Rev
Bye
Get TMR
Get MAC Addr
Error
Get Totalizer
Ping
Get Log
Get Num Vars
Download Start
Download CMPLT
Get Load Log
Get App Rev
Disk Size
Read Cel Data
Read File
Authenticate
Get IO Module CRCS
Get Unidentified Modules
Get Profiler Config
Get Config State
Get EGD Diag
Get IO Pack Hostnames
Get EGD Diags Reset
Get IO Mode Lock State
Get Ctrl Lock State
Get Parameter REV
Get Unhealthy EGD Vars
Get DC
Get IO Module Masters
Get Supported Msgs
Get Conn Usage
Get ACFG Config
Get Config
Get Diag State
Get ACFG State
Get Flash Info
Get ACFG Cleanup State
Get FF Live List
Recv HSR
Get Module DHCP Requests
Read Card
Get FF LD Config
Get Security State
Get Last SCEP Error
Profi Connect
Profi Disconnect
Get App Rev2
Get Dev List
Get Rev2
OSM Request
RSG SDI Request
Get CBUF List
Get CBUF CFG
Get CBUF Status
Get DDR Rev
Get Sevdd History Queue
Get Sevdd Action Queue
Get Odd History Queue
Get Odd Active Queue
Dam NOOP CMD
Dam Var List Data
Dam EGD List Data
Dam Profiler List Add
Dam Profiler List Data
Dam EGD Health List Data
Alarm And Event Notification
Alarm Lock
Alarm Unlock
Alarm Acknowledge
Alarm Acknowledge All
Alarm Unacknowledge
Alarm Reset
Alarm Reset All
Alarm Silence
Alarm Silence All
Alarm Unsilence
Alarm Dump Process Queue
Alarm Ping
Alarm Acknowledge Hold
Alarm Acknowledge All Holds
Alarm Unacknowledge Hold
Alarm Reset Hold
Alarm Reset All Holds
Alarm Override Hold
Alarm Remove Hold Override
Alarm Dump Hold Queue
Alarm MSG Process Alarm
Alarm Msg Hold
Alarm MSG Event
Alarm MSG SOE
Alarm MSG Diagnostic
Alarm Not UDH Communicator
Alarm Process Queue Sync
Alarm Hold Queue Sync
Alarm And Event Notification Delete
Alarm Horn Silence
GE Alarm Dump Process Queue
GE Alarm Dump Hold Queue
GE Alarm MSG Process Alarm
Alarm Update SPLtoken Value
GE Alarm MSG Hold
Alarm MSG Diagnostic Queue Sync
Analog Alarm And Event Notification
User Alarm Lock
User Alarm Unlock
User Alarm Acknowledge
User Alarm Acknowledge All
User Alarm Unacknowledge
User Alarm Reset
User Alarm Reset All
User Alarm Silence
User Alarm Silence All
User Alarm Unsilence
Analog Alarm Dump Process Queue
User Alarm Acknowledge Hold
User Alarm Acknowledge All Holds
User Alarm Unacknowledge Hold
User Alarm Reset Hold
User Alarm Reset All Holds
User Alarm Remove Hold Override
User Alarm Override Hold
Analog Alarm MSG Process Alarm
Analog Alarm And Event Notification Delete
Analog MSG Process Alarm
V3 Alarm And Event Notification
V3 Alarm And Event Notification Delete
V3 Alarm MSG Process Alarm
V3 Alarm MSG Diagnostic Alarm
V3 Alarm Queues Sync
V3 Alarm Dump Queues
V3 Alarm Dump Process Alarm
V3 Alarm Transition FF Diagnostic
V3 Alarm Reset FF Diagnostic
V3 Alarm Dump FF Diagnostic
V3 Alarm Dump Configured FF Blocks With Active Alerts
V3 Alarm Command
V3 Global Alarm Command
V3_1 Alarm Process Alarm Register
V3_1_Alarm Process Alarm Unregister
V3_2_alarm Process Alarm Unregister
V3_2 Alarm Command
Workstation SDI

Read/Write

All Read Only operations
Put Var
Force Var
RMForce Var
RMForce All Vars
Exec System
Write File
Set Totalizer
Delete File
ADL Forward
Novram Save
Set Time
Add Redirection Route
Delete Redirection Route
Parameter Load Exec
Set User ID
Put Var With Name
Force Var With Name
RMForce Var With Name
Set DC
Dual load CMPLT
ACFG File Cleanup
ACFG Load Start
ACFG Load CMPLT
ACFG Load Exec
ACFG Release
Online Incremental Load Exec
Set ACFG Diag
Device Backup Load Exec
Send HSE
Set Security State
Profi Write
Upload CBUF
DDR Load Exec
Dam Var List Add
Dam Var List Delete
Dam IONet EGD List Add
Dam IONet EGD List Delete
Dam EGD List Add
Dam EGD List Delete
Dam Profiler List Delete
Dam EGD Health List Add
Dam EGD Health List Delete
Dam IONet EGD Health List Add
Dam IONet EGD Health List Delete
V3_1 Alarm Dump
V3_2 Alarm Process Alarm Register

Full Access

Unrestricted access

GE-SRTP

Read Only

PLC Short Status Request
PLC Long Status Request
Return Control Program Names
Read System Memory
Read Task Memory
Read Program Memory
Establish Datagram
Programmer Log On
Return PLC Time Data
Get Module Status
Return Fault Table
Return Control Information
Block Manage
Session Control
PLC Features Supported
Read Addr Var
Symbol Lookup
Get DSM File
Notification Registration
File Read
Dir
FChecksum
Target Logon
Poll For Response
Deliver Protocol
Remote Read Services
Get All PVT Locations
Get Default Priv Level
Get Priv Level Info

Read/Write

All read-only operations
Write System Memory
Write Task Memory
Write Program Block Memory
Update Datagram
Set Control CPU ID
Set PLC State
Set PLC Time Data
PLC Clear All
Clear Selected FLT
Clear Fault Table
Write Datagram
Write Addr Var
File Write
FDelete
Rename
FCopy
Reference Set
Remote Write Services

Full Access

Unrestricted access

IEC60870

Read Only

APCI Format: S type
APCI Format: U type:
- Startdt
- Testfr
APCI Format: I type:
- Single point information
- Step position information
- Step position information with time tag
- Bit string of 32 bit
- Bit string of 32 bit with time tag
- Measured value, normalized value
- Measured value, normalized value with time tag
- Measured value, scaled value
- Measured value, scaled value with time tag
- Measured value, short floating point value
- Measured value, short floating point value with time tag
- Integrated totals
- Integrated totals with time tag
- Event of protection equipment with time tag
- Packed start events of protection equipment with time tag
- Packed output circuit information of protection equipment with time tag
- Packed single point information with status change detection
- Single point information with time tag CP56Time2a
- Measured value, normalized value without quality descriptor
- Double point information with time tag CP56Time2a
- Step position information with time tag CP56Time2a
- Bit string of 32 bit with time tag CP56Time2a
- Measured value, normalized value with time tag CP56Time2a
- Measured value, scaled value with time tag CP56Time2a
- Measured value, short floating point value with time tag CP56Time2a
- Integrated totals with time tag CP56Time2a
- Event of protection equipment with time tag CP56Time2a
- Packed start events of protection equipment with time tag CP56Time2a
- Packed output circuit information of protection equipment with time tag CP56Time2a
- End of initialization
- (General) Interrogation command
- Counter interrogation command
- Read command
- Clock synchronization command
- (IEC 101) Test command
- (IEC 101) Delay acquisition command
- Test command with time tag CP56Time2a
- File ready
- Section ready
- Call directory, select file, call file, call section
- Ack file, ack section
- Directory
- Query Log - Request archive file
- Double point information with time tag
- Double point information
- Single point information with time tag

Read/Write

All read-only operations
APCI Format: I type:
- Setpoint command, normalized value
- Setpoint command, scaled value
- Setpoint command, short floating-point value
- Bit string 32 bit
- Setpoint command, normalized value with time tag CP56Time2a
- Setpoint command, scaled value with time tag CP56Time2a
- Setpoint command, short floating point value with time tag CP56Time2a
- Bit string 32 bit with time tag CP56Time2a
- Parameter of measured value, normalized value
- Parameter of measured value, scaled value
- Parameter of measured value, short floating point value
- Parameter activation
- Last section, last segment
- Segment

Full Access

Unrestricted access

iFix

Read Only

Variable Access:
- Read Request
- Read Response
- Get Variable Definition Request
- Get Variable Definition Response
- Database Reload Request
- Database Reload Response
- Initiate DB Reload Request
- Initiate DB Reload Response
- Terminate DB Reload Request
- Terminate DB Reload Response
Alarm Handling | Session-Oriented Alarm:
- Alarm Message
- Session Alarm Request
- Session Alarm Response
Connection Manager:
- Check Session Request
- Check Session Response
- Connection Management Request
- Connection Management Response
- Connection Info Data Request
- Connection Info Data Response
- Diagnostic Request
- Diagnostic Response
- Remote Node Is Shutting Down
Transfer Data:
- Transfer Data Request
- Transfer Data Response
Mdba Handshake:
- Mdba Handshake Request
- Mdba Handshake Response

Read/Write

All read-only operations
Variable Access:
- Write Response
- Write Request

Full Access

Unrestricted access
Variable Access:

Modbus

Read Only

Read Coils
Read Discrete Inputs
Read Holding Registers
Read Input Registers
Read Exception Status
Read Diagnostics
Read - Fetch Comm Event Ctr
Read - Fetch Comm Event Log
Read - Report Slave Id
Read File Record
Read/Write Multiple Registers
Read Fifo Queue

Read/Write

All read-only operations
Write Single Coil
Write Single Register
Write Multiple Coils
Write Multiple Registers

Read UMAS:

Unity
- INIT COMM
- Read Id
- Read Project Info
- Read Plc Info
- Read Card Info
- Request For Memory Read
- Repeat
- Take Plc Reservation
- Release Plc Reservation
- Keep Alive
- Read Memory Block
- Read Variable
- Read Coils Registers
- Initialize Download
- Download Block
- End Strategy Download
- Read Eth Master Data
- Monitor Plc
- Data Information Request
- Check Plc Status Connect Diag Buffer
- Read Io Object
- Read Io Module
- Reading System Bits
- Reading System Words

Write UMAS:

All read UMAS operations
Unity:
- Write Memory Block
- Write Variable
- Write Coils Register
- Write Io Object
- Writing System Bits
- Writing System Words