Layer 3 Network Integration Scripts

Introduction

The scripts and information on this page provide information to configure network devices to integrate with MetaAccess NAC. In order for the integration to function, all of the MetaAccess NAC system steps outlined on the NAC Layer 3 Integration page must be completed as well.

Layer 3 Router/Switch Integration Scripts

The following scripts are provided to integrate Layer 3 routers/switches with MetaAccess NAC . For information on supported makes/models/versions, please refer to the article below and review the Network Integration Requirements section.

Technical Requirements

If any errors are encountered or there are questions regarding the script, email opswat-support@opswat.com with the make/model of the device along with a screenshot of the errors and a support ticket will be generated.

NOTE - In order for PBR to function properly, the router must have a Layer 3 interface in the subnet the MetaAccess NAC system resides in.

NOTE - Scripts provided below are designed to be cut and paste and non-disruptive, however, organizations are encouraged to followed existing change control guidelines.

NOTE - Scripts provided below are designed to only be modified in designated areas where variables are listed. Making other modifications to the scripts may cause the script not to function and/or impact production network traffic. __Be sure to remove all comments in () before applying the script**\

NOTE - Do not run scripts from behind Layer 3 interfaces that will be under MetaAccess NAC policy as terminal session connectivity loss may occur.

NOTE – Ensure routing on the test subnet for which the script is applied has already been validated before applying the script.

Alcatel-Lucent

Alcatel-Lucent Layer 3 Integration Script (6850/6900)

Integration Script - Alcatel-Lucent Layer 3 Switch Integration Script (6850 or 6900).pdf

Alcatel-Lucent Layer 3 Integration Script (9700)

Integration Script - Alcatel-Lucent Layer 3 Switch Integration Script (9700).pdf

Brocade/Ruckus/Arris/Extreme (ICX and MLX Series)

Brocade/Ruckus/Arris Layer 3 Integration Script (ICX)

Integration Script - Brocade+Ruckus+Arris Layer 3 Switch Integration Script (ICX).pdf

Brocade/Extreme Layer 3 Integration Script (MLX)

Integration Script - Brocade+Ruckus+Arris Layer 3 Switch Integration Script (MLX).pdf

Cisco

Cisco Router Integration Script (2800)

Integration Script - Cisco Router Integration Script (2800).pdf

Cisco Layer 3 Switch Integration Script (2960X/XR)

Integration Script - Cisco Layer 3 Switch Integration Script (2960X or XR).pdf

Cisco Layer 3 Switch Integration Script (3750X)

Integration Script - Cisco Layer 3 Switch Integration Script (3750X).pdf

Cisco Layer 3 Switch Integration Script (3850/4500 SUP7-8/4500X)

Integration Script - Cisco Layer 3 Switch Integration Script (3850 or 4500 SUP7-8 or 4500X).pdf

Cisco Layer 3 Switch Integration Script (4500 SUP4-5)

Integration Script - Cisco Layer 3 Switch Integration Script (4500 SUP4-5).pdf

Cisco Layer 3 Switch Integration Script (6500 SUP720)

Integration Script - Cisco Layer 3 Switch Integration Script (6500 SUP720).pdf

Cisco Layer 3 Switch Integration Script (6500/6800 SUP2T)

Integration Script - Cisco Layer 3 Switch Integration Script (6500 or 6800 SUP-2T).pdf

Cisco Layer 3 Switch Integration Script (Nexus 7000)

Integration Script - Cisco Layer 3 Switch Integration Script (Nexus 7000).pdf

Cisco Layer 3 Switch Integration Script (Nexus 7000 F2/3 Module)

Integration Script - Cisco Layer 3 Switch Integration Script (Nexus 7000 F2 or 3 Module).pdf

Cisco Layer 3 Switch Integration Script (Nexus 9300/9500)

Integration Script - Cisco Layer 3 Switch Integration Script (Nexus 9300 or 9500).pdf

Cisco Layer 3 Switch Integration Script (Catalyst 9500)

Integration Script - Cisco Layer 3 Switch Integration Script (Catalyst 9500).pdf

Dell

Dell N-Series/OS6 Layer 3 Integration Script

Integration Script - Dell-EMC N-Series OS6 Layer 3 Integration.pdf

Dell S-Series/OS9 Layer 3 Integration Script

Integration Script - Dell-EMC S-Series OS9 Layer 3 Integration.pdf

HP

HP Layer 3 Integration Script (3800)

Integration Script - HP Layer 3 Switch Integration Script (3800).pdf

HP Layer 3 Integration Script (5400/8200)

Integration Script - HP Layer 3 Switch Integration Script (5400 or 8200).pdf

Type to search, ESC to discard
Type to search, ESC to discard
Type to search, ESC to discard
Next to read:
Juniper EX/vQFX integration
On This Page
Layer 3 Network Integration ScriptsIntroductionLayer 3 Router/Switch Integration ScriptsAlcatel-LucentAlcatel-Lucent Layer 3 Integration Script (6850/6900)Alcatel-Lucent Layer 3 Integration Script (9700)Brocade/Ruckus/Arris/Extreme (ICX and MLX Series)Brocade/Ruckus/Arris Layer 3 Integration Script (ICX)Brocade/Extreme Layer 3 Integration Script (MLX)CiscoCisco Router Integration Script (2800)Cisco Layer 3 Switch Integration Script (2960X/XR)Cisco Layer 3 Switch Integration Script (3750X)Cisco Layer 3 Switch Integration Script (3850/4500 SUP7-8/4500X)Cisco Layer 3 Switch Integration Script (4500 SUP4-5)Cisco Layer 3 Switch Integration Script (6500 SUP720)Cisco Layer 3 Switch Integration Script (6500/6800 SUP2T)Cisco Layer 3 Switch Integration Script (Nexus 7000)Cisco Layer 3 Switch Integration Script (Nexus 7000 F2/3 Module)Cisco Layer 3 Switch Integration Script (Nexus 9300/9500)Cisco Layer 3 Switch Integration Script (Catalyst 9500)DellDell N-Series/OS6 Layer 3 Integration ScriptDell S-Series/OS9 Layer 3 Integration ScriptHPHP Layer 3 Integration Script (3800)HP Layer 3 Integration Script (5400/8200)