Update Smart Touch Offline

This article explains how to perform an offline update for MetaDefender Drive Smart Touch using an external USB storage device.

This document instructs you to update the Smart Touch a.

In Ready To Scan mode, Smart Touch works as a MetaDefender Drive. To update the scanning engines, follow the same steps as for MetaDefender Drive: Update Engines Offline Directly on MetaDefender Drive

The procedure below applies to updating the Smart Touch application itself using the offline update package (.deb + .yml).

Before you begin, prepare the following:

  • A USB storage device formatted (NOT ENCRYPTED) as NTFS or FAT32 with at least 500MB space free
  • Download the Debian package .deb and its YAML descriptor .yml file from published download URLs in My OPSWAT.
  • Create the /updates folder on the USB drive.
  • Copy the update files into the /updates folder.
  • Safely eject the USB storage from your computer.

Perform the offline update

  • Make sure Smart Touch is powered off. If Smart Touch is currently running, shut it down gracefully from the UI or power button before proceeding.
  • Insert the prepared USB storage into the USB-C port of the Smart Touch device
  • Power on Smart Touch, enter PIN code
  • After Smart Touch starts it will
  • automatically detect the /updates folder on the USB storage
  • automatically pick up the offline update package (.deb + .yml) and begin the update process.
  • The update will proceed without requiring user interaction until finish. Do not power off Smart Touch or remove the USB storage during this time.
VariableType to search · ESC to discard
GlossaryType to search · ESC to discard
InsertType to search · ESC to discard
No matches
null
On This Page
Update Smart Touch OfflineBefore you begin, prepare the following:Perform the offline update