Interval time to scan Port and scan OS

  1. Choose "Allow scan for hardware info" if scanning for hardware is permitted. It only scans once, the first time it detects the device.
  2. Choose "Allow scan OS" if scanning the operating system is permitted. The scan interval is 20 minutes. The exact timing depends on the cycle of the run, calculated as "cycle time + interval time."
  3. Choose "Allow scan port" if scanning for open ports is permitted. The scan interval is 5 minutes. The exact timing depends on the cycle of the run, calculated as "cycle time + interval time."
Type to search, ESC to discard
Type to search, ESC to discard
Type to search, ESC to discard